17-Piece Metric Pass Through Socket Ratchet Set
Reach Nuts on Long Studs with a True Pass-Through Design
This 17-piece metric set uses open-ended sockets and a hollow reversing ratchet, allowing long bolts and threaded rods to travel through the center during size-matched strut-top, suspension, and long-bolt work.
Designed for Manual Fastening
Open-Ended Sockets for Long Stud Access
The hollow sockets allow long bolts and threaded rods to pass through the socket and ratchet center, helping you reach size-matched nuts that ordinary closed sockets cannot access.
72-Tooth Reversing Ratchet
The reversing ratchet requires 5 degrees of swing, supporting manual turning where available movement is limited. Its head has a fully open center for pass-through use.
Adapters for Standard Sockets
The included 3/8-inch and 1/2-inch quick-release adapters fit into the hollow ratchet so it can accept standard sockets. Standard sockets are not included.
Multi Ways Manual Drive Options for Limited Headroom
Use the pass-through ratchet, or turn a socket by its 19 mm external hex with a standard 19 mm box or open-end wrench when overhead clearance is restricted. The wrench is not included.
Specifications
Review the metric coverage and included components before ordering.
| Metric pass-through ratchet and socket set |
| 17 pieces |
| 13 metric sockets |
| 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, and 24 mm |
| 13 metric sockets, reversing ratchet, extension bar, 3/8-inch adapter, 1/2-inch adapter, and molded case |
| 72-tooth reversing ratchet with 5-degree swing |
| 12-point pass-through socket |
| 19 mm |
| Chrome vanadium steel |
| Manual fastening only |
Frequently Asked Questions
Which socket sizes are included?
The set includes 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, and 24 mm sockets. It is a metric-only set, and 20 mm and 23 mm sockets are not included.
Can this set be used with standard sockets?
Yes. The included 3/8-inch and 1/2-inch quick-release adapters allow the hollow ratchet to accept standard sockets. Standard sockets are not included.
Can these tools be used with powered equipment?
No. The chrome vanadium steel tools are specified for manual fastening. Do not use powered tools, cheater bars, or the ratchet to break seized or rust-frozen fasteners.